The Replacement Locking Knob Assembly for Yakima Raptor Aero Roof Mounted Bike Carrier # Y8820181 is a replacement part for a Yakima Raptor bike carrier, it attaches to the clamp on that carrier. It does not actually lock the rack to the crossbars.
To lock the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 to your roof rack you would need to get the Yakima Accessory Lock Housing # Y07220 and the Yakima Same Key System (SKS) Lock Cores # Y07204. view full answer...
There are 2 different MightyMounts that will fit your 2006 Toyota Sequoia SR5 w/ factory roof rack.
The first mount is the Universal MightMount, part # Y03590, which is compatible with the crossbars on your Sequoia and the widest range of Yakima roof mount accessories such as bike racks, roof baskets, kayak carriers, and snow equipment carriers.
The other Might Mounts that will fit your Sequoia include the 23H Horizontal MightyMount, part # Y03523, The 23H mount is mainly for water sport... view full answer...
The reason why it is important to consider whether you need a hitch extender adapter on your 2017 Jeep Wrangler is to make sure that any hitch-mounted accessories will not interfere with the rear spare tire. For most hitch-mounted accessories, we include the dimensions of the closest part of the accessory from the center pin hole of the hitch.
For accessories that have multiple measurements available such as the Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount # NV22B, you... view full answer...
We do offer a reducer that will allow you to use a Class III or IV accessory in a Class IV 2-1/2 inch receiver. The Curt Reducer Sleeve, part # C45405 would work well for you. The outside dimension is just a bit less than 2-1/2 inches, to allow for easy installation and removal. The inside dimension would be a bit larger than 2 inches to allow easy installation and removal of the hitch accessory.
Ford OEM 2-1/2 inch receivers have a tighter/different radius on their 2-1/2 inch receiver... view full answer...
We do have ladders for bunk beds, like the Stromberg Carlson # LA-460, but unfortunately none of them are collapsible. The part I mentioned though comes with hooks so it will be stable during use but can easily be moved around to accommodate the smaller space inside the Minnie Winnie.
There are a variety of camping accessories that we carry which include a Lawn Chair Rack # LA-104, Fire Pits # CAM58035, a Plate Dispenser # CAM57001, and everything in-between. I have attached a link to... view full answer...
We have two options for you to use an adapter with your 12V accessory with a 110V outlet.
They are the AC to DC Adapter for Swift Hitch Wireless Camera System, part # PP01, and the Power Converter for Fan-Tastic Vent Endless Breeze Portable Box Fan, part # FV1101-09.
The PP01 is obviously more compact and easier to carry around (and not trip over). The FV1101-09 allows for more amperage to come through for accessories that need higher settings. view full answer...
The best option to carry an accessory while towing is to use the Curt Multipurpose Ball Mount, part # D210. It includes a pin and clip but you'll need a hitch ball with a 1 inch diameter like # 19260 for a 1-7/8 inch, # 63845 for a 2 inch, or # 63847 for a 2-5/16 inch. view full answer...
The only parts that you need to install the Rhino-Rack Vortex Aero crossbars, # RRVA118B-2, on your 2003 Honda Accord are the 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK030, that you referenced. You will not need any additional parts other than a bike rack, ski/snowboard carrier or cargo carrier depending on what you plan on carrying.
When choosing roof mounted accessories, there are a few things to keep in mind. First, the Rhino-Rack roof rack will have a crossbar... view full answer...
Thank you for purchasing your Thule WingBar Evo roof rack, parts # TH711400 and # TH710401, and your Thule Hull-A-Port Kayak Carrier # TH834. To install the carrier on the roof rack you will need an additional component, Thule adapter part # THXADAPT11. This will let you complete the installation. view full answer...
The first thought people tend to jump to is charging an additional battery via the alternator. The problem with this solution is that unless you are only powering smaller accessories like cell phones the alternator won't be able to sufficiently charge your auxiliary battery. For this case a solar panel system like the Go Power Kit # 34273836 with an Entry Plate # 34276245 would be your best bet.
If you can tell me how many amps your accessories are rated for and how long you plan on using... view full answer...
I can help you with carrying 2 kayaks but there are no carriers which mount directly to a Pioneer Platform # RR95TB. Instead you will need to mount the Accessory Bars # RR43138B to your platform. These bars are 53" long. This will then allow you to mount the Rhino-Rack Kayak Carrier # S512 using the Adapters # KC-FK8. The adapters change the kayak carrier to mount inside the channels of the accessory bars rather than having to clamp around a regular roof crossbar. So for carrying both your... view full answer...
In order to install the Yakima HullyRoller Roof Rack Kayak Carrier to your 2019 Subaru Impreza with Thule AeroBlades, you will need to use the Universal MightyMounts for Yakima Roof Mounted Accessories part # Y03590. The MightyMounts are designed to allow for the use of aero crossbars while using the HullyRoller.
In order to lock the HullyRoller to your crossbars, you will need both the Yakima Accessory Lock Housing part # Y07220 and the Yakima Same Key System part # Y07204. If you need... view full answer...
Yes, the part numbers you listed are everything you will need to install the Inno square bar roof rack on your 2000 Audi S4. The 46 inch Square Load Bars, # INB117, the foot pack, # INSUT, and the fit kit, # INK149, make up the entire roof rack.
The only additional items that you may need are roof mounted accessories. If you are interested in adding a roof bike rack, kayak carrier or cargo box, I would be happy to recommend a product for your needs. I've also attached links to our roof... view full answer...
We do have an adapter for that will allow a Yakima ski rack that only attaches to round crossbars to be able to attach to square crossbars.
What you will need are the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590.
I have added links below to a video review and the instruction manual for you to check out as well. view full answer...
For a basic hitch pin and clip for a 2-inch trailer hitch we offer part # PC3. This secures your ball mount or hitch accessory but does not lock it or provide an anti-rattle function.
For a hitch lock to secure your item you can use a standard pin lock # e98880 or for a lock with anti-rattle you can use # 63232 which works with hitch accessories that have a hollow shank. view full answer...
For starters, you will need to install a hitch like the Draw-Tite # 75726. You will also need a pin and clip, part # PC3 or a locking hitch pin like # e98882 to secure the cargo carrier in the receiver. These are the necessities, but there are other accessories that you might be interested in.
There is a light kit available # e98943-44LED. If you are interested in a light kit, you would need to install a 4-pole trailer connector on the vehicle, part # 118449.
A cargo bag like the etrailer... view full answer...
You will not need a short roof adapter for your 2011 Ford Fusion. The short roof adapter is primarily required for small compact coupe vehicles such as a 2 door Honda Civic or Toyota Yaris. The SportRack Semi-Custom Roof Rack, part # SR1010, is all you will need to add a roof rack to your Fusion.
The SportRack roof rack uses standard square steel crossbars that are compatible with most roof mount accessories. Once this roof rack is installed, you will have a crossbar spread of 26 inches.... view full answer...
The only accessories we have for the CargoGlide 1000XL Sliding Tray for Trucks part # CG1000XL-7548 on your 2017 Ram 1500 is the Adjustable Dropdown Stabilizer Legs for CargoGlide Sliding Truck Bed Tray part # CGSL1 and the Drop Link Tailgate Lowering Kit for CargoGlide Sliding Trays part # CG-FD1.
Unfortunately, we do not carry the Cargo Track Tie Down Bolts or the Cargo Divider at this time. view full answer...
To get your 2021 Ford Ranger setup for flat towing I recommend the following parts:
- Blue Ox Base Plate Kit # BLU77XR
- Roadmaster Nighthawk All Terrain Tow Bar # RM-677 (with safety cables)
- Roadmaster Accessory Kit # RM-9284-2
- Brake Kit # DM26VR (motorhome air brakes) OR # DM86VR (motorhome hydraulic brakes)
- High-Low Adapter (see attached helpful article - bracket height is 17" for Blue Ox base plate kit)
The Blue Ox base plate kit has removeable tabs for a clean look when... view full answer...
Go To Results